.:: adtecsupport.com | knowledgebase ::.

Register | LogIn

Search:     Advanced search

Browse by category: ____ Encoders Decoders -- Legacy -- Outdated documentation (mediaControl users) DTA MUX DPI-1200 System DTV -- DTVGuide IPTV -- iptvManage Other KB Help IRD ( RD-60 ) Firmware

Glossary

---

adtecsupport kb

Categories
	Encoders (24) Encoder information (mediaHUB HD Pro, mediaHUB HD 422, EN-80, edje4xxx, edje2xxx, HDMI2QAM)		Decoders (19) Decoder information (signEdje/edje4111/soloist4111/soloistHDPro)		DTA MUX (8) Digital Turn Around Information (DTA3050, DTA3051)
	DPI-1200 (3) DPI-1200		System (15) Applicable to all adtec units (DTA, DPI, mediaHUB, 4111, signEdje, soloistHDPro)		DTV (3) DTVGuide, for ATSC Terrestrial/Cable and DVB Terrestrial/Cable
	IPTV (1) IPTVManage Information		Other (2) Adtec devices that don't fall under other categories		KB Help (1) Information in regards to the Adtec Knowledge Base
	IRD ( RD-60 ) Information about our contribution RD-60 decoder with optional DVB-S2 premium and standard demodulators.		Firmware We have had a few customers over the years request to be put on a firmware update mailing list. We do not have a mailing list, but do have RSS feeds available through the knowledge base. Subscription to the desired RSS feed will provide updates when new firmware is released.

Most viewed   Factory Reset (Resets all configuration including IP Address) A factory reset of a unit might be useful for a variety of reasons.  A factory reset will... Not rated 08 Mar, 2010 Views: 711 Manual Firmware Upgrade via Telnet and FTP This article shows how to manually update the firmware on an Adtec unit.  Please use the... Not rated 16 Dec, 2009 Views: 583 Basic FTP and Telnet Connectivity The attached article explains how to get connected to an Adtec unit with a third party FTP Client... Not rated 17 Nov, 2009 Views: 568 Adtec advanced Usage Manual (DVC, SHD, STC, XCP) Introduction             Thank... Not rated 22 Sep, 2011 Views: 508 CableLabs VOD Specifications CableLabs VOD... Not rated 26 Jan, 2010 Views: 361

Recent articles   Dolby E Troubleshooting Information   Dolby E Troubleshooting Information 1.) Do not use a black burst generator as a clock... Not rated 28 Sep, 2011 Views: 81 Does Adtec have plans to use MPEG 4 container/wrapper? We can decode MPEG 4 AVC/H.264, encoder the ISO MPEG 2 Transport Stream container/wrapper, We do... Not rated 22 Sep, 2011 Views: 101 Does the Sign Edje or Edje 4111 do MPEG 4 playback? Adtec’s current line of decoders support MPEG 2 and MPEG 4 AVC/H.264. The files must be... Not rated 22 Sep, 2011 Views: 41 mediaHUB HD Pro 3.06.07 Upgrading of firmware for a unit is not recommended for normal applications. There are inherent... Not rated 06 Mar, 2011 Views: 74 Low audio levels when using analog audio     The analog audio inputs were designed for  +18dbfs input levels, per... Not rated 12 Jul, 2010 Views: 132

---

Powered by KBPublisher (Knowledge base software)

DISCLAIMER:
While Adtec makes every effort to keep the information on this web site accurate, we make no warranty or representation, expressed or implied about its accuracy, completeness or appropriateness for a particular purpose. Thus you assume full responsibility for using the information at this web site, and you understand and agree that neither Adtec Inc. nor any of its employees is responsible or liable for any claim, loss or damage resulting from its use.

Adtecinc.com Links: